HP Smart Update Manager 6.0.0 User Guide

Possible valuesDescriptionParameter
Server DNS nameEnables you to provide a list of
servers, separated by semicolons, for
XENAMELIST
trust relationships for the HP Systems
Management Homepage. (Applies to
Linux SPP only.)
This parameter is valid only if the
TRUSTMODE parameter is set to
TrustByName. (Applies to Linux SPP
only.)
The hp_qla2x00 QLogic Fibre
Channel Driver uses this parameter to
HPQLA2X00FO
• SinglePath
• SecurePath
determine the failover mode to use.
(Applies to Linux SPP only.)
• QLogicFailure
NOTE: No default value
Y, N (default)The hp_qla2x00 QLogic Fibre
Channel Driver uses this parameter to
HPQLA2X00FORCE
determine whether to skip detection of
third-party storage. (Applies to Linux
SPP only.)
User can define the OAUID
variable multiple times before each
HOST variable.
Provides the user name credentials for
the OA associated with VC. You must
define a value of these variables
before the HOST variable in the
OAUID
[TARGETS] section. This parameter
applies only for VC firmware.
You can also use OAUSER or
OAUSERNAME.
User can define OAPWD variable
multiple times before each HOST
variable.
Provides the password credentials for
the OA associated with VC. You must
define a value of these variables
before the HOST variable in the
OAPWD
[TARGETS] section. This parameter
applies only for VC firmware.
You can also use OAPASSWORD.
YES, NOAllows the installation to proceed on
a Superdome 2 node even when
warnings are returned during analysis.
IGNOREWARNINGS
Superdome 2 servers only
ALL, COMPLEX, PARTITIONSThis argument determines which
Superdome 2 firmware is updated.
UPDATETYPE
Superdome 2 servers only
For example:
DEVICELIST=npar1,blade1/1
Use this argument when the
UPDATETYPE=PARTITIONS. This
DEVICELIST
Do not put spaces between the
parameters
argument specifies the subset of
partitions or blades to update when
you do not want to update all
Superdome 2 servers only
partitions. Valid devices are:
npar(number) and
blade(enc)/(bay).
For example:
REBOOTLIST=npar1,npar2
Use this argument when the
UPDATETYPE= ALL or
REBOOTLIST
Do not put spaces between the
parameters
UPDATETYPE= PARTITIONS. This
argument specifies specific partitions
to reboot after the partition firmware
Superdome 2 servers only
has been updated. Valid npar values
are npar(number).
Input files 57