HP ProLiant SL250s Gen8 Server Maintenance and Service Guide

Removal and replacement procedures 27
Remove the front GPU bracket
1. Power down the server (on page 24).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (on page 24).
4. Remove the front GPU cage (on page 26).
5. Remove the interposer board assembly (on page 26).
6. Remove the front GPU bracket.
Remove the PCI riser cage
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser board assembly.
1. Power down the server (on page 24).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (on page 24).
4. Remove the front GPU cage (on page 26).
5. Remove the interposer board assembly (on page 26).
6. Remove the front GPU bracket (on page 27).
7. Remove the SFF hot-plug drive cage (on page 25).
8. Remove the PCI riser cage:
a. Loosen the thumbscrew securing the PCI riser, and then remove the screw securing the PCI riser
cage.