HP ProLiant SL250s Gen8 Server Maintenance and Service Guide

Removal and replacement procedures 28
b.
Lift the cage to remove it from the tray.
Remove the FlexibleLOM riser cage
1. Power down the server (on page 24).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (on page 24).
4. Remove the SFF hot-plug drive cage (on page 25).
5. Remove the front GPU cage (on page 26).
6. Remove the interposer board assembly (on page 26).
7. Remove the front GPU bracket (on page 27).
8. Remove the FlexibleLOM riser cage.