HP ProLiant SL250s Gen8 Server Maintenance and Service Guide

Removal and replacement procedures 34
6.
Remove the level 2 power board.
To replace the component, reverse the removal procedure.
Rear GPU riser board
To remove the component:
1. Power down the server (on page 24).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (on page 24).
4. Remove the interposer board assembly (on page 26).
5. Remove the rear GPU cage (on page 29).
6. Disconnect the GPU power cables
7. Disconnect the power capping cable from the riser board.