HP ProLiant SL390s G7 1U Half-width Server Maintenance and Service Guide

Removal and replacement procedures 35
To remove a hard drive:
1. Slide the HDD carrier latches to unlock the HDD handle.
2. Raise the HDD handle.
3. Lift the HDD assembly out of the tray.
4. Rotate the HDD carrier handle down.
5. Lock the HDD carrier latches.
Figure 7 Removing a hard drive
To install a hard drive:
1. Unlock the HDD carrier latch.
2. Rotate the HDD carrier handle up.
3. Insert the HDD carrier and align the four pins.
4. Rotate the HDD carrier handle down.
5. Lock the HDD carrier latches.