HP ProLiant SL390s G7 1U Half-width Server Maintenance and Service Guide

Removal and replacement procedures 55
Power supply unit (PSU)
Located on the rear panel of the server power supply is a standard ranging 750 watt or 1200 watt
PSU with PFC (power factor correction) function.
Figure 39 Power supply unit
WARNING: Note the following reminders to reduce the risk of personal injury from electric shock
hazards and/or damage to the equipment.
•
Installation of power supply units should be referred to individuals who are qualified to service server
systems and are trained to deal with equipment capable of generating hazardous energy levels.
•
DO NOT open the power supply unit. There are no serviceable parts inside it.
To remove the PSU backplane:
1. Remove the top cover from the power supply cage.
2. Remove the PSU backplane.
3. Reinstall the top cover to the power supply cage