HP ProLiant SL390s G7 2U Half-width Server Maintenance and Service Guide

Removal and replacement procedures 38
To install a hard drive:
1. Push the hard drive assembly into the drive bay until it stops.
2. Press the hard drive carrier handle inward until it clicks.
Figure 10 Installing a hot-plug hard drive
3. Install the hard drive assembly on the tray and make sure the notch on the carrier locked on the
tray.
Figure 11 Installing a non-hot-plug drive
IMPORTANT: Do not discard the hard drive blank. If the drive is removed in the future, you must
reinstall the hard drive blank to maintain proper system airflow.