HP ProLiant SL4500 Series Setup and Installation Guide

Installation 20
Installation
Installation overview
To set up and install the chassis:
1. Set up and install the rack. For more information, see the documentation that ships with the rack.
2. Disassemble the chassis ("Disassembling the chassis" on page 20).
3. Install the chassis into the rack ("Installing the chassis" on page 24).
4. Install the chassis components ("Component installation" on page 29) into the chassis.
5. Connect the chassis components ("Cabling and powering up the chassis" on page 40) in the chassis.
Disassembling the chassis
Before installing the chassis into the rack, you must disassemble the chassis. Because a fully populated
chassis can weigh up to 99.79 kg (220 lb), remove the components from the chassis to make moving and
installing the chassis easier.
1. With the chassis still on the pallet, remove all components from the front and rear of the chassis.
a. System fans