HP ProLiant SL4500 Series Setup and Installation Guide

Installation 32
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not plug
telephone or telecommunications connectors into RJ-45 connectors.
To install the component:
1. Release the I/O handle, and then push the I/O handle down.
2. Insert the I/O module into the chassis, and be sure it is fully seated.
3. Push the I/O module handle up to lock it into place.
Installing a management module
To install the component:
1. Be sure the handle is in the down position.
2. Insert the management module into the device bay, and press firmly until the module is seated.