HP SmartStart Scripting Toolkit 8.7 Linux Edition User Guide

Toolkit utilities 33

Processor Manufacturer : Intel

XML System Configuration : conrep_SL160zg6_20090728.xml

Hardware Configuration : sl160zconrep.dat

Saving configuration data to sl160zconrep.dat.

CONREP Return code: 0

NOTE: The file names after the -x and -f options must be specified, otherwise, the default file

names Conrep.xml and Conrep.dat are used, respectively.

NOTE: A platform specific XML file needs to be used for HP ProLiant 100-series servers. If you

use the default name this may cause an error while running the CONREP utility.

CONREP –l (Load from Data File) Example Usage for HP ProLiant

100 series servers

To load the BIOS configuration settings from a previously captured/edited data file (in this case

“sl160zconrep.dat”) to an SL160z G6 server:

[root@ilo002481b08134 conrep]# ./conrep -l -xconrepSL160zg6_20090728.xml -fsl160zconrep.dat

conrep 3.00 - SmartStart Scripting Toolkit Configuration Replication Program

System Type: ProLiant SL160z G6

ROM Date : 07/28/2009

ROM Family : O33

Processor Manufacturer : Intel

XML System Configuration : conrep_SL160zg6_20090728.xml

Hardware Configuration : sl160zconrep.dat

Loading configuration from sl160zconrep.dat.

ASM values not set! aborting

CONREP Return code: 0

NOTE: The "ASM values not set! aborting" message shown in the output above is a spurious

error message meant only for 300-series and above ProLiant systems. It should be ignored if seen

on an HP ProLiant 100-series server.

CONREP Data File Sample Contents for HP ProLiant 100 series

servers

A typical data file generated by CONREP is similar to the following:

<Conrep_data>