User's Manual

reference guide

load originals and load paper

set the paper type

If you want to use a different type of paper, such as photo paper, transparency

film, t-shirt transfer paper, or brochures, simply load that paper in the paper

tray. You should then change the paper type settings to ensure the best print

quality.

HP recommends paper type settings according to the type of paper you are

using.

This setting refers to copy options only. If you want to set the paper type for

printing, set the properties from the Print dialog box.

! Press the Paper Type button to select Plain or Photo.

To avoid jams, remove papers from the output tray frequently. The output tray

capacity is affected by the type of paper and the amount of ink you are using.

For more information about output-tray capacity, refer to the technical

information section in the HP Photo & Imaging Help.

4-by-6 inch photo

paper

Insert the photo paper with the print-side down into the paper tray until

it stops. Place the long edge of the photo paper against the right side of

the paper tray, and slide the paper-width guide up against the long edge

of the photo paper until it stops. If the photo paper you are using has

perforated tabs, load the photo paper so that the tabs are closest to you.

paper tips