User's Manual

reference guide

additional setup information

3 Double-click on HP Uninstaller.

4 Follow the directions that appear on the screen.

5 After the program finishes removing the software, disconnect your

HP PSC, and restart your computer.

6 To reinstall the software, insert the HP PSC 1100/1200 Series CD-ROM

into your computer’s CD-ROM drive.

Note: When re-installing the software, follow the instructions on the Setup

Poster. Do not connect the HP PSC to your computer until after you have

completed the software installation.

7 On the desktop, open the CD-ROM, double-click on hp all-in-one installer,

and follow the instructions that appear.

additional troubleshooting help

You may want to refer to the readme file for more information on possible

installation problems. On Windows, you can access the readme file from the

Start button on the taskbar; select Programs, Hewlett-Packard, hp psc

1200 series or hp psc 1100 series, View the Readme File. On Macintosh, you

can access the readme file by double-clicking on the icon located in the top-level

folder of the HP PSC software CD-ROM.

The readme file provides more information, including

• Using the Re-install utility after a failed installation to return your PC to a

state that will allow the HP PSC to be re-installed.

• Using the Re-install utility on Windows 98 to recover from a Composite

USB System Driver missing error.

This error may occur if the hardware is installed prior to installing the

software. After running the Re-install utility, reboot your PC, and install the

HP PSC software before connecting the HP PSC to your computer.

You can also find more information on this website