User's Manual

2
3
quick start
You can perform many functions using either the front panel or the HP PSC
software.
Even if you do not connect your HP PSC to a computer, you can use the front
panel to copy documents or photos.
front panel features
Review the illustrations below and identify the location of the buttons on the front
panel.
1
2
3
4
7
9
10
11
5
8
2
1
3
4
7
9
10
11
6
8
feature purpose
1 On/Resume (HP PSC 1200 Series): Turns the HP PSC on and off. Also
used to resume a copy or print job after a jam or other error. If the HP PSC
is in an error state, you can turn it off by pressing On/Resume for 3
seconds.
On (HP PSC 1100 Series): turns the HP PSC on and off.
2 Check Paper: A status light that indicates the need to load paper or
remove a paper jam.
3 Check Print Cartridge: A status light that indicates the need to reinsert or
replace the print cartridge or close the print cartridge access door.
4 Cancel: Use to stop a job or exit button settings.
5 Copies (1-9) (HP PSC 1200 Series): Use to change the number of copies
for this copy job.