UPS R3000 XR Models User Guide

Overview
1-6 HP Uninterruptible Power System R3000 XR Models User Guide
2 3 4 5 6 7
81011
1
9
Figure 1-4: Rear panel of R3000e XR-INT
1 REPO port
2 ERM connector
3 Communications port/option slot
4 Load segment 1 (three IEC-320-C13 receptacles)
5 Load segment 2 (three IEC-320-C13 receptacles)
6 Load segment 3 (three IEC-320-C13 receptacles)
7 Load segment circuit protectors
8 PDU output (IEC-320-C20) receptacle (load segment 1)
9 Cord retention clip attachment locations
10 Input power receptacle (IEC-320-C19) for country-specific plug attachment
11 Ground bonding screw
WARNING: To prevent personal injury from electric shock, do not install this model
where the total earth (ground) conductor leakage current for all connected devices
exceeds 3.5 mA. If the total earth (ground) conductor leakage current exceeds 3.5 mA,
use the UPS R3000i XR-EURO, R3000i XR-SCHUKO, or R3000i XR-SA model.