UPS R6000 Models User Guide

Overview
1-6 HP Uninterruptible Power System R6000 Models User Guide
UPS Option Cards
Two option slots are available to further expand the capabilities of the UPS R6000 in both
power control and server communication for networking environments. HP option kits
include the Multi-Server UPS Card, the Scalable UPS Card, and the SNMP-EN Adapter.
These enhancements provide communication with multiple systems, multiple UPS units, and
network management applications.
Option kits can be used in the following configurations:
Table 1-3: Option Card Matrix
Case Slot Multi-Server Scalable SNMP-EN
Adapter
Direct Connect Result
(no PDU)
1 1 X
2
3 servers managing a total of
5 load segments
2 1 X
2 X
5 servers managing a total of
5 load segments
3 1 X
2
1 server managing a total of
9 load segments
4 1 X
2 X
1 in-band connection managing
a total of 9 load segments
5 1 X
2
1 in-band connection managing
a total of 5 load segments
Note: Board combinations can be used in the primary UPS only. When UPS units are chained, no
additional boards can be used in the other units.
For installation instructions, refer to the documentation shipped with the option card kits.