UPS R6000 Models User Guide

HP Uninterruptible Power System R6000 Models User Guide 2-1

Operation

This chapter contains information on operating the UPS. Topics include using the front panel

controls, LCD display, LED indicators, and modes of operation. Knowledge of these features

is helpful when configuring the system and performing more advanced functions on the unit.

NOTE: Refer to the instructions included with the UPS kit for installation considerations and

procedures. Copies of this document can be downloaded from the HP website at www.hp.com.

Front Panel Controls and LCD Display

The front panel controls and LCD display provide an easy-to-use UPS interface for setup,

load control, and status monitoring.

Figure 2-1: Front panel control buttons

Item Description Function

1 Center Large four-way rocking button used to control navigation

through LCD menu structure: up, down, left, and right

2 Enter Used to navigate and select options in the LCD menu

structure

3 Escape Used to navigate and deselect options in the LCD menu

structure

4 On Starts UPS powering the load

5 Standby Places UPS into Standby mode/Reset

6 Test/Alarm Reset Resets alarm or initiates self-test