UPS R6000 Models User Guide

Operation
2-4 HP Uninterruptible Power System R6000 Models User Guide
• Bypass Mode
— The
LED is solid green, the LED is solid yellow, and an audible alarm is
active in five-second intervals.
— Power is available at the UPS output receptacles.
— Batteries are not monitored or charged.
— Bypass mode can be enabled by moving the Bypass switch on the UPS rear panel
from Normal to Bypass.
Figure 2-4: Placing the UPS in Bypass mode
• Battery Mode
— The
LED is solid yellow.
— Batteries are not being charged.
— Power is available at UPS outputs.
— The shutdown process has begun.
• Sleep Mode
— All LEDs are off.
— Sleep mode is optional and can be enabled or disabled using the LCD menu. The
default value for Sleep mode is
disabled. If Sleep mode is enabled, the UPS shuts
down when it is on battery power and the load is less than eight percent.
— Power is automatically restored to the output receptacles when utility power is
restored.