UPS R6000 Models User Guide

LCD Configuration and Status
3-6 HP Uninterruptible Power System R6000 Models User Guide
Meters
Select Meters on the Main Menu and press the Enter button to view the UPS voltage,
frequency, and power.
Main Menu
→ Meters
This submenu provides information on virtual meters that monitor the UPS voltages. Scroll
up and down through the menu using the Center button. If the words continue off the screen,
scroll right and left to read the message. Press the Enter button to view selections. Table 3-3
lists the options under the Meters menu.
Table 3-3: Meters Options
LCD Display Explanation
Input Volts
x
The utility voltage.
Output Volts
x
The voltage available at the UPS output receptacles.
Input Frequency
x
The utility voltage frequency in Hertz.
Output Frequency
x
The frequency in Hertz available at the UPS output receptacles.
Output Power
▌▌▌▌▌▌▌▌▌▌•▐▐ - - - -
The output power is shown in a bar graph. This example shows 120%
load (overload). There are ten squares in front of the 100% line. Each
represents a 10% load. The two squares past the line each represent
10% of overload (20% overload in all).
Output Power
▌▌▌▌▌▌- - - - • - - - - - - -
In contrast, this display shows a 60% load.
Battery Volts
x
The battery voltage.