UPS R6000 Models User Guide

LCD Configuration and Status
HP Uninterruptible Power System R6000 Models User Guide 3-9
Load Control
Select Load Control from the Main Menu to turn load segments on and off.
Main Menu
→ Load Control
Load Control displays the current status of the load segments, and allows navigation to
different load segments, using the Center button.
Load Control
ON: 1 2 - - 5
When a segment is selected and the Enter button is pressed, a confirmation message is
displayed.
Load Control
Bank 3 ON? N
Change the N to a Y by pressing the up and down arrows on the Center button. Press the Enter
button to make a selection.
The display reflects the changes.
Load Control
Banks 1 2 3 – 5 ON
Display Test
Select Display Test from the Main Menu to test the LCD display. Press the Escape button to
exit the test.
❚❚❚▌▌▌▌▌▌▌▌▌▌▌▌▌▌▌▌▌▌
❚❚❚❚❚▌▌❚❚❚DISPLAY
TEST❚❚❚❚❚▌▌❚❚❚