UPS R6000 Models User Guide

LCD Configuration and Status
3-12 HP Uninterruptible Power System R6000 Models User Guide
Set Sync Range ±
±±
± Hertz
Select Set Sync Range ± Hertz from the System Setup menu to set the sync range.
• ±3.0 Hertz for normal mode
• ±5.0 Hertz for extended mode
Set Sync Range
+/-3.0 Hz
Communications Setup
Select Comm Setup from the System Setup menu to configure a serial communication port.
Comm Setup
→ Serial Port 1
Table 3-6 lists the options available under the Comm Setup menu for Port 1 and Port 2.
Table 3-6: Comm Setup Menu Options
LCD Display Explanation
Serial Port x
→ Baud Rate
Accesses the Baud Rate option.
Baud Rate
* 1200
The current Baud Rate is displayed next to the asterisk (*). Select the
desired rate from the list of 5 values: 1200, 2400, 4800, 9600, or
19200.
Serial Port x
→ Data Bits
Accesses the Data Bits option.
Data Bits x
* 8
The current Data Bits value is displayed next to the asterisk (*). Select
the desired value for data bits: 7 or 8.
Serial Port x
→ Stop Bits
Accesses the Stop Bits option.
Stop Bits x
* 2
The current Stop Bits value is displayed next to the asterisk (*). Select
the desired value for stop bits: 1 or 2.
Serial Port x
→ Parity
Accesses the Parity option.
Parity x
* odd
The current Parity value is displayed next to the asterisk (*). Select
the desired value for parity: odd, even, none, mark, or space.