UPS R6000 Models User Guide

Index
HP Uninterruptible Power System R6000 Models User Guide Index-3
LEDs
alarm configurations 5-4
overview 2-3
Load Control menu 3-9
load segments
identified 1-4
setting up 3-10
turning on and off 3-9
M
Main Menu 3-3
maintaining UPS batteries 4-1
management software 1-5
manual Bypass mode 2-4
map of LCD menus 3-4
matching utility voltage with UPS configuration 3-2
matrix, option cards 1-6
menus
Active Alarms 3-7
Battery Data 3-8
Display Test 3-9
Firmware Version 3-8
Load Control 3-9
main 3-3
map 3-4
Meters 3-6
Status 3-5
System Setup 3-10
using 3-3
Meters menu 3-6
MIB 1-9
models 1-2
modes of operation 2-3
Multi-Server UPS Card
overview 1-7
part number 1-5
N
navigating menus 3-4
noise filtering C-3
noise, audible C-4
O
obtaining new batteries 4-2
On button 2-1, 2-5
Operate mode 2-3, 2-5
operating altitude C-4
operating temperature C-4
operating the UPS 2-1
option cards
configuration matrix 1-6
part numbers 1-5
options, hardware 1-5
output frequency, viewing 3-6
output power, viewing 3-6
output receptacles C-2
output specifications C-2
output voltage
setting 3-2
viewing 3-6
overview
ERM 1-10
front panel indicators 2-2
LEDs 2-3
Multi-Server UPS Card 1-7
PDU 1-10
REPO port 1-11
Scalable UPS Card 1-8
SNMP EtherNet Adapter 1-9
UPS 1-1
P
panels
front 1-2
rear 1-3, 1-4
parameters, configuration 3-1
parity, setting 3-12
part numbers
hardware options 1-5
IEC-320 jumper cords 1-10
spare batteries 4-2
UPS models 1-2
password
default 3-10
setting 3-11
PDU
overview 1-10
part numbers 1-5
physical specifications C-1
ports
overview 1-1
REPO 1-11
setting up 3-12
Power Distribution Unit See PDU
power management software 1-5
Power MIB 1-9
power, viewing 3-6
power-up display 3-3
Pre-Failure Battery Warranty 4-8
preventing electrostatic discarge B-1