HP R5500 UPS Tower Conversion Kit Installation Instructions

HP R5500 UPS Tower

Conversion Kit

Installation Instructions

Precautions

WARNING: To prevent personal injury from earth

conductor leakage current:

• Do not operate the UPS while disconnected from the

utility power source.

• Disconnect load devices before disconnecting the UPS

from the utility power source.

68 kg

150 lb

This symbol indicates that the UPS exceeds the

recommended weight for one individual to handle

safely.

WARNING: To reduce the risk of personal injury

or damage to the equipment, observe local

occupational health and safety requirements and

guidelines for manual material handling.

Kit contents

This kit might contain extra hardware for your convenience.

• This document and/or documentation CD

• Warranty information

• Tower stand kit that includes:

o Bezel

o Base pedestal (2)

o Tower conversion feet (4)

o Battery end-caps (2)

o Screws (4)

Required tools

• No. 2 Phillips screwdriver

• T-10 Torx screwdriver

Installing the UPS as a tower

Before installing the unit, review and adhere to all warnings

provided in "Precautions (on page 1)."

The information contained herein is subject to change without notice. The

only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing

herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Part Number 490370-002

une 2008 (Second Edition)