HP Netserver Rack Storage/12 SCSI Upgrade Guide
HP NetServer RS/12 SCSI Upgrade Guide
HP Part Number 5971-0819
Printed in November 2000
Table 1. Supported Ultra2 SCSI Components and Configurations
Ultra2 Host System Adapters
(Ultra2 Hosts) Ultra2 RS/12 SCSI Card Ultra2 SCSI Hard Disk Drives (HDDs)
D2140A HP NetRAID-1Si
D4992A HP NetRAID-1
D5955A HP NetRAID-3Si
D5991A HP RS/12FC
Adaptec 2940UW
D5989B RS/12
D6025B RS/12 SCSI Card
NOTE: In cluster configuration,
do NOT mix a D6025C Ultra3
SCSI card with a D6025B Ultra2
SCSI card in the same RS/12
enclosure.
D6106A (9.1 GB, low-profile, 7200 rpm)
D6107A (9.1 GB, low-profile, 10,000 rpm)
D7174A (18.2 GB, low-profile, 7200 rpm)
D7175A (18.2 GB, low-profile, 10,000 rpm)
D8210A (36.4 GB, half-height, 10,000 rpm)
NOTE: Ultra3 SCSI HDDs in Table 2 are also
supported at Ultra2 SCSI transfer rate. Ultra2 and
Ultra3 SCSI HDDs can be mixed.
SIMPLEX CONFIGURATION (Management Board Configuration Switch 1 in Left position)
One Ultra2 host system adapter One D6025B Ultra2 SCSI card in
RS/12 Slot 1
Twelve low-profile Ultra2 hard disk drives, or
Eight half-height Ultra2 hard disk drives
DUPLEX CONFIGURATION (Management Board Configuration Switch 1 in Left position)
Two Ultra2 host system adapters
in one host system
Two D6025B Ultra2 SCSI cards
in RS/12
In left half of enclosure:
Six low-profile Ultra2 hard disk drives, or
Four half-height Ultra2 hard disk drives
In right half of enclosure:
Six low-profile Ultra2 hard disk drives, or
Four half-height Ultra2 hard disk drives
CLUSTER CONFIGURATION (Management Board Configuration Switch 1 in Right Position)
Two Ultra2 host system adapters,
one in each host system
Two D6025B Ultra2 SCSI cards
in RS/12
Twelve low-profile Ultra2 hard disk drives, or
Eight half-height Ultra2 hard disk drives