HP RDX USB 3.0 Removable Disk Backup System Firmware 2.
Description This document details how to use the HP RDX Utility to upgrade the firmware in HP RDX USB 3.0 Removable Disk Backup Systems to: • Firmware revision 2.10 (all internal, external and DL Server Module USB 3.0 models) Update recommendation Recommended Supersedes Firmware revision 1.70 Product models HP RDX320 USB 3.0 Internal Disk Backup System (B7B62A) HP RDX320 USB 3.0 External Disk Backup System (B7B63A) HP RDX500 USB 3.0 Internal Disk Backup System (B7B64A) HP RDX500 USB 3.
Fixes • • Enables HP RDX USB 3.0 Docking stations to operate in “Fixed Disk” mode or “Removable Disk” mode. Details can be found in the “Help” Section of the HP RDX Utility, version 2.32 or later (HP RDX Installer version 1.54): ◦ “Removable Disk” mode = Default mode, for use with HP RDX Continuous Data Protection Software, or third-party backup Applications. Note: WHQL certification applies to “Removable Mode” only.
6. Click Change Firmware... and browse to the desired firmware file (.bin). Once selected, the RDX Utility validates that the file selected is in fact RDX code for the unit being upgraded and loads the new code file on the RDX Dock. If a cartridge is installed, the RDX Dock ejects it and shuts down the cartridge interface prior to loading the new code. This guarantees that no data is corrupted during the code load. After the new code is loaded, the RDX Dock resets itself and begins running the new code.
