HP RDX Removable Disk Backup System Firmware release notes Part number: 5697-7643 1st edition: 23rd July 2008
Description This document details how to upgrade the firmware in the HP RDX Removable Disk Backup System using the HP RDX Utility to: • Firmware revision 2032 (all external models) • Firmware revision 3032 (all internal models) Update recommendation Recommended Supersedes Firmware revision 2025 (all external models); firmware revision 3025 (all internal models).
To fix this problem, obtain the latest HP RDX Removable Disk Backup System firmware and upgrade using the HP RDX utility, as described below. Prerequisites None Installation instructions NOTE: You must be logged in as the Administrator or have administrator privileges to install the HP RDX utility. 1. If you have already installed the HP RDX utility, go to step 2.
Figure 1 Diagnostic window NOTE: Once selected, the RDX Utility validates that the file selected is in fact RDX code for the unit being upgraded and loads the new code file on the RDX drive. If a cartridge is installed, the drive ejects it and shuts down the cartridge interface prior to loading the new code. This guarantees that no data is corrupted during the code load. After the new code is loaded, the RDX dock resets itself and begins running the new code.
Effective date July 23, 2008 6
