HP RDX Continuous Data Protection Software Release Notes Abstract This document provides release information for CDP Backup Client version 3.0.512.13908. These releases add support for Windows 8 x64 and Windows Server 2012.
© Copyright 2011-2013 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
Description This document outlines the details of the HP RDX Continuous Data Protection Software (CDP) Backup Client 3.0.512.13908. Update recommendation: Update if running on Windows 8 x64 or Windows Server 2012 Supersedes: Build 3.0.512.10890 and all previous versions.
• Windows 7 (all SPs) (x86, x64) • Windows 8 (all SPs) (x86, x64) • Windows Server 2003 R2 (x86, x64) • Windows Server 2008 (x86, x64) • Windows Server 2008 R2 (x64) • Windows Small Business Server 2011 (x64) • Windows Server 2012 (x64) Languages Languages supported for installation and operation for this release: • Chinese (Simplified) • Chinese (Traditional) • English (US) • French • German • Greek • Italian • Japanese • Korean • Polish • Portuguese • Russian • Spani
• In some cases, offline cartridges are not seen in the Cartridges tab of RDX management. • The installer file must be named HP-RDX-Installer.exe. If you rename the installer file, you will see a Failed to initialize the cartridge message following the installation. Uninstall, reboot, rename the installer file to HP-RDX-Installer.exe, and reinstall to resolve the issue. • When running Full System Recovery with the HP B-series storage controllers, configured RAID volumes are not recognized.
For 1. 2. 3. systems running version 3.0.512.10890: From the Control Panel, uninstall HP RDX Continuous Data Protection Software. Reboot the computer. Install the new release of HP RDX by following the “Installation instructions” (page 5). A recovery point will be created immediately following the update. Alternatively, you can update the HP RDX software from a Windows command window: 1. Open a Windows command line window with administrator privileges. 2. Run the installer as HP-RDX-Installer.exe /UPDATE.