HP Reference Information Storage System v1.6 Administrator Guide (T3559-96073, July 2007)

5. Click Apply.

6. Close the EMS Scheduler application.

7. Restart the Launch Ma nager service to make the new setting take effect.

Repeat this procedure as needed for all mailbox mining events.

Enabling a scheduled event

After a new event has been created, it must b e edited to enable it and set other parameters.

In the Schedul

e Events Maintenance window, click Edit. The ed it window that appears is speciﬁcto

the selected event type.

Each edit window is examined in the sections that follow.

Figure 37 Enabling a sc heduled event

Editing selective archiving events

The Selective Archiving Events window has a variety of conﬁgurable options:

• Enabled c

heckbox:Usetoenableordisableanevent.ThedefaultvalueisDisabled.

• SMTP Address: Select the SMTP Address check box and enter the RISS Virtual IP (VIP) used for

SMTP. The VIP is the internal RISS domain that stores documents and is the same value as the

ipToDom

ainInfo attribute used in Domain.jcml.

• Recipient Address: Select the Recipient Address check box and enter <user>@<riss-

domain.com>.Replace<riss-domain.com> with the na me of the RISS domain that should

store th

e Exchange ser ver email. The doma in name must correspond exactly to the name

speciﬁ

ed in Domain.jcml for this system. Note that more than one recipient can be speciﬁed,

by separating the addresses with commas.

• RISS Domain Name: Select the RISS Domain check box and enter the name of the internal RISS

domain

to which the email from this journal mailbox should be stored. The Domain Name must

match exactly the domain name attribute speciﬁed in Domain.jcml.

• RISS Domain ID: Select the RISS Domain ID check box and enter the domain ID that matches the

domai

n name speciﬁed above. The Domain I D must ma tch exactly the domain ID attribute in

Domain.jcml.

124

Conﬁguring Outlook or Lotus Notes