HP Reference Information Storage System v1.6 Administrator Guide (T3559-96073, July 2007)
Table 63 Mail Attend er r ule to delete temporary items in Drafts folder
General
RissDeleteDrafts
Inform ation Stores <User define>
Folders
\Drafts
Include subfolders
Conditions Test Message Ke
ywords
Keywords= [MES
SAGE_MAPICUSTPROP("PTOW AST A-
TUS",C644819
5FCA8CB4BB3E31303AA83C02C)]
Test=”Equals”
Value=”PTOWA T
EMP”
Actions
Report <User define>
Delete Message
Deletion Type=”Hard Delete”
Other action settings: Click the Modify buttons and select the following
check boxes.
• Do not warn the user before performing the action
• Applythisactiontoeachitemonlyonceperruleexecution
Schedule
<User define>
Enable the rule
Configuring the asp.config file
The asp.config file has severa l OWA configuration settings.
RISS servers
A typical system can have one or more RISS products. The RISS section of asp.config contains a list
of RISS servers. The syntax for an entr y is a keyname followed by the protocol and server name. The
keyname iden
tifies the server. If there is a special template in the next section, the keyname must be the
same for the server and its corresponding template. The keyname also shows up in the error page
if a document fails to load.
The syntax is: Symbol=<protocol>://<Server> where <protocol> can b e http or https.
For example
:
[RISS]
mbarney=http://mbarney
papoon=htt
p://papoon
RISS URL templates
The Template section contains custom RISS URL templates. For standard RISS products, the only setting in
this section is the default setting.
If a custom template is defined, the template keyname must be the same as the corresponding RISS
server keyname.
IMPORTANT:
Do not add a custom template u nless instructed to do so by your HP service representative.
142
Configuring Outlook or Lotus Notes