HP Reference Information Storage System v1.6 Administrator Guide (T3559-96073, July 2007)

Creating and ru
nning DAS jobs
The basic steps
for creating and running a DAS job are as follows:
1. Create an LDAP connection. See "Creating LDAP ser ver connections" on page 44.
2. Create the job. When you create a new job, you assign the job a name and an L DAP connection,
and set up the j
ob quer y in the LDAP server. See "Creating jobs"onpage45.
3.
Assign the job to an HT TP portal. See "Assigning HTTP portals" on page 47.
4.
Run the job. See "Running DAS jobs"onpage47.
Creating LDAP server connections
To create an LDAP connection:
1. In the LDAP Server Connectors area, click New LDAP.
2. Complete the form to create an LDAP service connection by entering the following information:
Figure 5 New L DAP connection
• Connect
ion Name: Nam e used to identif y the LDAP connection.
• Hostname: IP address of the LDAP server.
• Binder user: User in the LDAP directory tree that you want to bind to. At a
minimu
m, the user must have read access to all users objects. For example:
cn=Administrator,cn=Users,dc=hostname,dc=com.
• Binder pswd: Password of the Binder user.
•Direct
ory Server type: Type of LDAP ser ver to which you are connecting: Microsoft Active
Directory or Lotus Domino.
• Security Option: Type of LDAP security: simple authentication or SSL.
•Port:
Open LDAP port of the LDAP server. Use the por t 389 for simple authentication. Use
port 636 for SSL support.
3. To test the LDAP server connection before creating it, click LDAP test.
A content pane displays the status of the LDAP connection. It tells you whether the connection and
bind
are successful and the authentication types that are supported by the LDA P server. Errors
are displayed in red.
4. Click Create.
5. Retu
rn to the Account Synchronization view and verify that the new LDAP ser ver connection is
listed under LDAP Server Connectors.
44
Account Synchronization