HP StorageWorks Reference Information Storage System V1.4 Administrator Guide (T3559-96027, March 2006)

Table 93 View Config view features , ser vices
Feature
Description
Host
Name of host on which service is running.
Click link to display configuration information for host. See Table 91 on page 90.
Description
Description of service. Example: Spine Check.
Max. Check Attempts
Maximum number
of times to check service before a service problem status
condition is co
nsidered HARD. See "Hard and soft status conditions"onpage30.
Normal Check Interval
Time between ordinary checks of service.
Retry Check Interval
Time between checks of service when it is not responding.
Check Command Command used to check service.
Click link to display command definition. See Table 97 on page 93.
Check Period
Name of defined checking period: always , which means service can be checked
any time.
Clicklinktodisplaydefinition of the always period. See Table 95 on page 92.
Enable Active Checks
If active service checks are currently enabled.
Default Contact Groups Contact groups defined for service: allAdmins is only contact group PCC uses.
Click contact
group link to display definition of contact group. See Table
96 on page 92.
Enable Notifications If notifications are currently enabled for service.
Notification Inter val This is always No Renotification, meaning only one notification is sent when a
serviceisdetectedashavingaproblem(seenext).
Notification
Options
Service stat
us values that can cause notifications to be sent: CRITICAL and
RECOVERY, wh
ere RECOVERY represents a transition from a CRITICAL status
value to the n
ormal status value (OK) .
Notification Period Name of defined notification period: always, which means notifications can be
sent any time; they are sent immediately.
Clicklinktodisplaydefinition of the always period. See Table 96 on page 92.
Retention Options
Types of information retained in retention file, /usr/local/nagios/var/
status.sav: all types of information.
(Not used by PCC: Parallelize, Volatile, Obsess Over, Enable Passive Checks, Check Freshness, Freshness
Threshold, Event Handler, Enable Event Handler, Stalking Options, Enable Flap Detection, Low Flap Threshold,
High Flap T
hreshold, Process Performance Data, Enable Failure Prediction, and Failure Prediction Options.)
Reference Information Storage System
91