.Part 1 Architecture HP SAN Design Reference Guide 785351-001

Considerations
• x8 PCI Express Gen2 card
• Requires 14.5 W of power
• 1 GbE is not supported
HP StoreFabric CN1100R
Features
The HP StoreFabric CN1100R Dual Port CNA has the following features:
• Ships with half-height and full-height brackets
• Dual ports for redundancy
• Full 10-Gb/s bandwidth on both ports
• Each port can operate as a NIC and/or FCoE port
• Two SFP+ connectors
• Supports optical or copper cables
Considerations
• Requires an x8 PCI Express Gen2.1 card
• Provides 4 Watts typical, 9 Watts maximum power
• 1 GbE is not supported
HP CN1000Q
Features
The HP CN1000Q and CN1100E CNAs have the following features:
• Ships with half-height and full-height brackets
• Dual ports for redundancy
• Full 10-Gb/s bandwidth on both ports
• Each port can operate as a NIC and/or FCoE port
• 2 SFP+ connectors
• Supports optical or copper cables
Considerations
• x8 PCI Express Gen2 card
• Requires 19 W of power
• 1 GbE is not supported
FCoE storage systems
HP supports the following FCoE storage systems:
• “3PAR StoreServ 10400/10800/7200/7400/7450 with 10GbE FCoE host ports” (page
72)
• “P9500 with the FCoE 10-GbE channel adapter (4 ports per adapter)” (page 72)
• “P63xx/P65xx with FCoE/iSCSI 10-GbE front end host ports (2 ports per controller)” (page
73)
HP FCoE products 71