.Part 1 Architecture HP SAN Design Reference Guide 785351-001

Windows 2003 (x86, x64) and 2008 (x86, x64)
• BFS is supported on all supported HP servers.
• The information in HP Boot from SAN Configuration Guide is accurate for Windows BFS on
a CNA based server for Windows 2003 with the following exceptions:
◦ You must install an HP CNA driver kit, available for download at the HP website:http://
www.hp.com/support/downloads
◦ For Windows 2003, press F6 to prompt for the driver disk.
◦ For Windows 2008, click Load Driver when prompted for the location in which to install
Windows. See Figure 51.
Figure 51 Install Windows 2008 (x86, x64)
The HP Boot from SAN Configuration Guide is available at http://h18006.www1.hp.com/storage/
networking/bootsan.html. Under Features, click Boot from SAN documentation.
Red Hat Enterprise Linux
• BFS is supported on all supported HP servers.
• The information in HP Boot from SAN Configuration Guide is accurate for BFS on a CNA
based server with the following exceptions:
◦ You must install an HP CNA driver kit, available for download at the HP website: http://
www.hp.com/support/downloads
◦ Use the linux dd mpath rather than the linux mpath command to prompt to load
a driver and enable multipath for the installation.
The HP Boot from SAN Configuration Guide is available at http://h18006.www1.hp.com/storage/
networking/bootsan.html. Under Features, click Boot from SAN documentation.
88 Fibre Channel over Ethernet