HP StorageWorks SAN Virtualization Services Platform administrator guide (5697-0109, July 2009)

Figure 3 Management interface
The following sections describe steps that need to be performed in creating the initial pool of SVSP
blocks, creating a virtual disk or LUN out of those blocks, and then presenting that virtual disk to a
server.
Common SVSP tasks to get started
These tasks allow you to make new virtual disks available for use.
Creating stripe sets
See the “Working with stripe sets” chapter in the HP StorageWorks SAN Virtualization Services
Platform Manager user guide for detailed information on using stripe sets.
Creating SVSP storage pools
See the “Working with storage pools” chapter in the HP StorageWorks SAN Virtualization Services
Platform Manager user guide for detailed information on viewing and managing storage pools.
Creating SVSP virtual disks
See the “Working with virtual disks ” chapter in the HP StorageWorks SAN Virtualization Services
Platform Manager user guide for detailed information on viewing and managing virtual disks.
SAN Virtualization Services Platform overview18