HP StorageWorks Virtualization Services Manager v2 server user guide (5697-0137, September 2009)

Rack warnings
WARNING!
To reduce the risk of personal injury or damage to the equipment, be sure that:
• The leveling jacks are extended to the floor.
• The full weight of the rack rests on the leveling jacks.
• The stabilizing feet are attached to the rack if it is a single-rack installation.
• The racks are coupled together in multiple-rack installations.
• Only one component is extended at a time. A rack may become unstable if more than one com-
ponent is extended for any reason.
WARNING!
To reduce the risk of personal injury or equipment damage when unloading a rack:
• At least two people are needed to safely unload the rack from the pallet. An empty 42U rack can
weigh as much as 115 kg (253 lb), can stand more than 2.1 m (7 ft) tall, and may become unstable
when being moved on its casters.
• Never stand in front of the rack when it is rolling down the ramp from the pallet. Always handle
the rack from both sides.
Contents of the server shipping carton
Unpack the server shipping carton and locate the materials and documentation necessary for installing
the server. All the rack mounting hardware necessary for installing the server into the rack is included
with the rack or the server.
The contents of the server shipping carton include:
• Server
• Power cord
• Rack mounting hardware kit and documentation
Installing the server into the rack
To install the server into a rack with square, round, or threaded holes, refer to the instructions that
ship with the rack hardware kit.
If you are installing the server into a telco rack, order the appropriate option kit at the
RackSolutions.com website (http://www.racksolutions.com/hp). Follow the server-specific instructions
on the website to install the rack brackets.
Use the following information when connecting peripheral cables and power cords to the server.
Setup24