HP SAN Virtualization Services Platform 3.0.5 Release Notes (5697-1031, June 2011)
Table Of Contents
- HP StorageWorks SAN Virtualization Services Platform 3.0.5 Release Notes
- Description
- Versions
- Product models
- Fixes
- Prerequisites
- Installation instructions
- Host operating systems and multipath drivers
- Devices supported
- SVSP-supported storage arrays
- Capabilities and limitations
- SVSP system capabilities and limitations
- SVSP front-end capabilities and limitations
- SVSP back-end capabilities and limitations
- Configuration best practices
- Operational best practices
- Issues and workarounds
- Upgrade issues
- Upgrading with large back-end disks
- Upgrade order
- Replacing a DPM in a DPM group when upgrading from SVSP 2.x to SVSP 3.0.x
- Operating system issues
- Decreased DPM performance in VMware environment
- The Windows Server 2008 UAC prevents applications requiring admin privileges from working
- Windows offers to format newly discovered disks resulting in data loss
- Miscellaneous Windows issues
- OpenVMS support without async mirrors
- SMI-S provider can delete some setup virtual disks
- Servers running HP-UX 11.23 disconnect from SAN
- Setting the cluster bit for Serviceguard in Linux or HP-UX
- Capacity limits with thin provisioned volumes
- VSM issues
- Thin virtual disks must have read/write permission and cluster flag
- VSM GUI indicates passive VSM not ready for failover
- Disabled Delete menu when virtual disk is member of synchronous mirror group
- SVSP web server hang makes GUIs inaccessible
- WSRM configuration step needed on VSM v2 server
- Imported LUNs must be aligned to a 1 MB capacity
- Verify free space before concatenating thin virtual disk on thick virtual disk
- Manual failover of loaded system with VSM GUI causes a non-expected system state
- VSM GUI unable to remove all host presentations in one operation
- Threshold limit message only sent once
- Restoring a VSM setup from a backup cannot have PiTs
- Error 1618 during VSM installation
- Limit of 63 PiTs on thin virtual disk
- Front-end hosts not able to work with objects
- Export/import query does not work
- Cannot have same first 29 characters in sync mirror task names
- Cannot expand VDG without same DPM as the members
- VSM does not enforce 512 data movers
- Issue when exceeding 180 async mirror tasks
- MSA capacity can be reported in base 2 or base 10
- Error with Continuous Access license capacity when replicated differently
- HP XP array volumes show as failed after creation of storage pool
- Long boot time with large configurations
- Cannot write to file error when using an MSA22xx array
- ForceActive with VSM server in unknown state
- Deletion of last DPM in a DPM group
- Changing virtual disk or group DPM selection from two to one DPM is not allowed
- Windows fault when array unresponsive
- VSM must be enabled for "Reboot on fatal error"
- VSM server connection to the SAN
- New front-end LUNs require rescan
- New back-end LUNs require rescan
- LUNs must have a preferred path/controller
- Import some HP and IBM back-end LUs only to designated pools
- Asynchronous mirrors and jobs do not fail when the source site is unavailable
- Accessing VSM may require Java Web Services cleanup
- IPv6 support limitations
- PiT deletions after reaching threshold Guard level
- Read-only permissions are not supported in the VSM GUI
- Potential for I/O loss with synchronous mirrors due to active DPM failure
- DPM issues
- DPM ports stay present during a DPM reboot
- Failback operation does not work after DPM replacement
- Physically disconnecting a DPM port results in a high rate of invalid transmitted word port errors
- Changing back-end virtual disks to be write protected is not supported
- Enabling Ethernet port without a cable results in diagnostic message on console
- A DPM upgrade reverts to SNMP host name setup
- Change active switch command does not work with Sun Solaris hosts
- Rescan is required after deleting or unpresenting virtual disks
- Period of high back-end load after a DPM reboot when synchronous mirror virtual disks are used
- I/O errors/timeouts when performing failover on large numbers of synchronous mirror virtual disks
- DPM reboots when a host has two different host types or personalities on two different SVSP domains
- DPM ports connected to a 4 Gb Fibre Channel switch may sometimes auto-negotiate to 2 Gb speed
- DPM NTP configuration does not work with Windows 2000 domain controllers
- Initial GUI port statistics values are zero for an extended time
- Running show debug dump command does not work as expected
- Order of magnitude of Tx/Rx Kbytes not correct with show ports stats command
- The ‘%’ option of the show log command moves to the end of the file
- Additional DPM limitations
- HP Command View SVSP issues
- HP Command View SVSP has reached end-of-life
- VSM CLI issues
- The SelectVSMDomain command fails with certain operating systems
- Some VSM CLI commands cause the CLI application to stop
- No error message with PurgeVirtualDisks command
- Exception error using Solaris with no VSM CLI virtual disk
- Host not checked when creating snapclone group
- Error received with GetDpmInfo command when using –SyncGroup argument
- Incorrect error message displayed with CreateSnapshotWithLun command
- Incorrect error message when ExpandVirtualDisk command is missing argument
- Incorrect error message when creating 65th PiT on a virtual disk
- The ListSnapshots command fails to return data with too many PiTs
- The DeleteRemoteAsyncMirrorGroup command does not work in HP-UX
- The BreakAllRemoteAsyncMirrorTasks command does not work in HP-UX
- The ? wildcard character in HP-UX is not reliable
- The ResumeLocalAsyncMirrorTask command does not work in HP-UX the first time
- The ResumeLocalAsyncMirrorTask command gives error in HP-UX if already resumed
- Incorrect error message when ManageSnapcloneGroup command is missing the Opcode argument in HP-UX
- The CreateSnapcloneGroupEx command fails with HP-UX if the group is still building
- The CreateSnapshotWithLun command fails to get last PiT instance for Pit26 with HP-UX
- Do not use DeleteVirtualDisk command with LastInstance argument in HP-UX
- Error with DeleteVirtualDisk command when virtual disk LUN number is out of range
- The CreateAsyncMirrorGroupEx command cannot be run in Linux
- VSS hardware provider issues
- Documentation issues
- Obtaining product documentation
1. Halt the second I/O stream to the snapshot (initiated in step 7 above).
2. Unpresent the snapshot to its host (presented in step 6 above).
3. Delete the snapshot (created in step 5 above).
4. Delete the PiT (created in step 4 above).
5. Halt the first I/O stream to the virtual disk (initiated in step 3 above).
6. Unpresent the virtual disk to its host (presented in step 2 above).
7. Delete the virtual disk (created in step 1 above).
Carrying this example further, if you decide to delete the pool from which virtual disks are created,
you must delete all the virtual disks in that pool. This requires that you delete or halt all operations
being performed on or by those virtual disks, like I/O, snapshots, PiTs, presentations, and so on.
• HP recommends that you limit the number of virtual disks in a pool to 500, with a maximum limit
of 1000. In addition, avoid creating virtual disks that span more than one pool.
• Do not remove a single snapshot from a virtual disk group snapshot set.
• Do not change any back-end logical unit characteristic (for example, number, name, size [by
expanding or contracting], and so on) once it has been virtualized (for example, entered into a
VSM storage pool) or is being managed by the VSM. The LUN identification has been written on
the LU by VSM.
• Before starting a migration task, make sure the task does not have any PiTs (such as user PiTs or
mirror PiTs). If PiTs exist, they must be deleted before the task starts, otherwise a future snapshot
created on these PiTs (or a rollback to them) after migration will not be consistent.
• Before installing or uninstalling VSM, you must make sure that all iSCSI connections are
disconnected and the VSM is disconnected from the SAN. You must log out of all existing Microsoft
iSCSI connections, remove any connections from the Favorites list, and reboot.
• After a disruption (perturbation) of VSM connections, wait at least two minutes to let the VSM
rediscover all paths.
• When booting from the SAN, make sure the host only sees that LUN through one path when there
is no multipathing software on the host.
• When rebooting one DPM, wait at least 30 minutes before rebooting the other DPM.
• Before disconnecting a VSM server from the domain, ensure that the other VSM server is running.
There is an increased risk of a Windows fault when disconnecting (even partially) a VSM server
from the domain (for example, to perform maintenance). The lack of an operational second VSM
server can lead to I/O failure. Additionally, HP recommends that you use the Failover VSM option
from the Tools > Maintenance menu in the SVSP GUI to ensure the VSM is passive before
disconnecting a VSM server.
• Before deleting an asynchronous mirror group, detach the task, delete the group, manually rollback
the PiTs on the destination virtual disk, and then delete the destination virtual disk once completed.
If the PiTs of the detached destination virtual disks are stuck in a rollback state, fail over the VSMs
in the destination domain.
• When disconnecting front-end HBAs, the VSM may not display the updated HBA information.
Therefore, check the access paths of the HBAs using the DPM console.
Operational best practices 9