HP StorageWorks SAN Virtualization Services Platform SMI-S User Guide (5697-0209, April 2010)

Method parameters
IN/OUTCommentsTypeParameter Name
In only
Name for the VirtualDisk being created.
This name will also apply to the Mul-
tiApp/SyncMirror Group and initial Mul-
tiApp/SyncMirror jobs.
stringElementName
In only
SyncType describes the type of copy that
will be made:
• Synchronous or Asynchronous Mirror-
ing - 6 ( Mirror )
• Snapclone - 8 ( Clone )
• Migration - 0x8000.. ( Move )
uint16SyncType
In only
• Synchronous mirroring operation - 2 (
Synchronous )
• All others - 3 ( Asynchronous )
uint16Mode
In only
This parameter must contain a reference to
an instance of either HPSVSP_VirtualDisk
or HPSVSP_Snapshot if the operation is
create snapclone or mirror; it must be a
reference to HPSVSP_VirtualDisk if the op-
eration is create migration or synchronous
mirror.
CIM_LogicalElement refSourceElement
In onlyThis shall be null.
CIM_ServiceAccessPoint
ref
SourceAccessPoint
In(N/A) and
Out
Not used as an input.
As an output, refers to the created target
storage element. Returns a reference to
HPSVSP_VirtualDisk.
CIM_LogicalElement refTargetElement
In only
The underlying storage for the target virtual
disk is drawn from this TargetPool.
CIM_ResourcePool refTargetPool
In only
If null,the VirtualDisk is allocated from the
TargetPool in the local SVSP domain, oth-
erwise the TargetPool is in the SVSP do-
main specified in the ServiceAccess-
Point.Name.
CIM_ServiceAccessPoint
ref
TargetAccessPoint
In only
The definition for the SettingData to be
maintained by the target storage object
(the replica).
This parameter shall be null.
CIM_SettingData refTargetSettingGoal
In only
This method waits until the UnSynchronized
CopyState is reached before returning.
This parameter shall be null.
uint16WaitForCopyState
Replication Services Profile158