HP StorageWorks SAN Virtualization Services Platform SMI-S User Guide (5697-0209, April 2010)

CommentsDescriptionProperty Name
Max speed in bits per second.MaxSpeed
This implementation shall only
support FC.
Set this property to 4 "FC"LinkTechnology
This property shall contain 16
un-separated upper case hex
digits.
PermanentAddress
This is an optional property.PortNumber
This property lists what the
maximum FC frame size (MTU)
that is possible for this port.
SupportedMaximumTrans-
missionUnit
BytesActiveMaximumTransmis-
sionUnit
Class associations
PropertyToAssociation Name
Antecedent
HPSVSP_DPMBackSideSCSIProtocolEnd-
point : CIM_SCSIProtocolEndpoint
HPSVSP_BackSidePortImplementsEndpoint
: CIM_PortImplementsEndpoint
PartComponent
HPSVSP_StorageAppliance : CIM_Com-
puterSystem
HPSVSP_InitiatorPortSystem Device :
CIM_SystemDevice
HPSVSP_DPMBackSideSCSIProtocolEndPoint : CIM_SCSIProtocolEndpoint
Class introduction
This class represents the protocol (command set) for an HPSVSP_DPMBackSideFCPort. There is one
instance of this class for each HPSVSP_DPMBackSidePort.
Class keys/properties
CommentsDescriptionProperty Name
The CreationClassName of the scoping
system.
“HPSVSP_StorageAppliance"SystemCreationClassName
Then name of the scoping system.
Same as
HPSVSP_StorageAppliance.Name
SystemName
The name of the class used in the cre-
ation of this instance.
HPSVSP_DPMBackSideSCSIProtocolEnd-
Point
CreationClassName
FC Initiator Ports262