HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)
Syntax
disable user [user name]
Keyword values
[user name]
Name of the user account that you are disabling.
See also
“Create user command” on page 19
“Delete user command” on page 22
“Enable user command” on page 32
“Modify user command” on page 42
“Show user command” on page 65
“Show users command” on page 65
Enable bootset command
Set the active bootset.
Syntax
enable bootset [number]
Keyword values
[number]
The number 1 or 2.
Notes
Since there are only two bootsets, enabling one bootset effectively disables the other. Therefore, there
is no “disable bootset” command.
See also
“Show bootset command” on page 48
“Show bootsets command” on page 49
Enable eth command
The DPM includes four Ethernet interfaces: MGMT, GE1, GE2, and GE3. This command enables the
specific Ethernet interface so that it can send or receive network traffic.
Syntax
enable eth [interface name]
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 27