HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)
Examples
modify chassis location “Second floor lab, Main Street office”
modify chassis maxframesize 1024
See also
“Show chassis command” on page 49
Modify date command
Sets the system date and time.
Syntax
modify date [MM/DD/YYYY hh:mm:ss]
Keyword values
[MM/DD/YYYY hh:mm:ss]
MM/DD/YYYY is the month, day, and year for the system time (year must be 4–digits long). hh:mm:ss
is the hours, minutes, and seconds for the system time.
Notes
Once the time zone is set, the system automatically switches between Standard Time and Daylight
Saving Time.
See also
“Modify timezone command” on page 41
“Show date command” on page 51
Modify eth command
Configures the Ethernet properties—IP address, gateway, and subnet—for the specified Ethernet
interface.
Syntax
modify eth [interface name] [family]
address [IP address] | gateway [gateway address] | netmask [subnet
mask]
Keyword values
At least one of the optional keywords is required:
[interface name]
Ethernet interface that you are modifying: MGMT, GE1, GE2, or GE3.
[family]
CLI commands36