HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)

Show eths command
Returns the configuration—IP address, subnet mask, MAC base address, and gateway—for the four
Ethernet interfaces: MGMT, GE1, GE2, or GE3.
Syntax
show eths
See also
“Disable eth command” on page 22
“Enable eth command” on page 27
“Modify eth command” on page 36
“Set eth command” on page 47
“Show eth command” on page 54
Show events command
Reads the SOAP event log and displays the number of entries requested.
Syntax
show events [number]
Keyword values
[number]
Number of events to display.
Show factory command
Display the factory setting for either the rank or WWNN values.
Syntax
show factory rank
show factory wwnn
See also
“Load factory command” on page 35
“Modify factory command” on page 37
Show fan command
Displays the fan location, the status (either OK or Error), and the RPM of the specified fan.
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 55