HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)

Show log command
Displays the contents of a log file.
Syntax
show log [logfile]
Keyword values
[logfile]
Name of log file to be displayed.
See also
“Watch log command” on page 68
Show ntp command
Displays the status of NTP for all regular and broadcast messages. Also shows the NTP server name
and state of the NTP service.
Syntax
show ntp
See also
“Disable ntp command” on page 24
“Enable ntp command” on page 29
“Modify ntp command” on page 38
“Restart ntp command” on page 45
Show port command
Returns diagnostic and status information for ports 0–15 on the DPM. See the sample output in the
Examples section below for more information.
Syntax
show port
[port number]
*
Keyword values
[port number]
An integer 0–15 to indicate the DPM Fibre Channel port.
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 59