HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)
Enable ntp command
Enables use of the ntp protocol on the DPM.
Syntax
enable ntp
See also
“Disable ntp command” on page 28
“Modify ntp command” on page 41
“Restart ntp command” on page 48
“Show ntp command” on page 63
Enable port command
Enables the specified Fibre Channel port number so that it can send and receive Fibre Channel traffic.
Syntax
enable port
[port number]
*
Keyword values
port number
Port number is an integer 0–15 to indicate the DPM Fibre Channel port to be enabled.
* indicates all Fibre Channel ports.
See also
“Disable port command” on page 28
“Modify ports command” on page 43
“Modify ports command” on page 43
“Show port command” on page 63
“Show ports command” on page 64
Enable secure command
Enables permissions on SSL-encrypted transmissions.
Syntax
enable secure [permission]
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 33