HP StorageWorks SAN Virtualization Services Platform 2.02 release notes (5697-8024, February 2009)

in this version. If you want to modify these ports, it can be done with the CLI. This restriction will be
removed in a future release.
DPM GUI fails to configure GE1 to AUTO
An error is returned when attempting to modify an Ethernet port (other than MGMT) with the GUI.
The MGMT port can be modified with the GUI. Use of the non-MGMT Ethernet ports is not supported
in this version. If you want to modify these ports, it can be done with the CLI. This restriction will be
removed in a future release.
DPM GUI cannot change DPM rank
An error is returned when attempting to modify the DPM rank with the CLI. The DPM rank can be
modified with the CLI. HP is working to resolve this issue.
Fan sensors not showing in DPM GUI
The fan sensors are missing from the GUI sensors panel. Fan status can be checked with the CLI. HP
is working to resolve this issue.
Initial GUI port statistics values are zero for an extended time
It can take up to 30 seconds for the port statistics values in the DPM GUI to be retrieved. This may
give the indication that nothing is happening. Wait for the collection of the statistics.
DPM GUI becomes unresponsive after a GUI-initiated reboot
If a management change made through the DPM GUI forces a DPM reboot, the GUI becomes
non-responsive and hangs. You must manually exit out of the GUI and then restart it. HP is working
to resolve this issue.
The Help > About window in the DPM GUI only contains a Close option
Selecting Help > About in the DPM GUI displays a minimal window with only the Close option. HP
is working to resolve this issue.
Adding and removing SNMP receivers in the DPM GUI is awkward; should not need to 'Apply'
It is currently necessary to click Apply to activate any changes made to the SNMP receivers with the
GUI. Simply clicking “add or “remove” should be sufficient. HP is working to resolve this issue.
Loading a configuration file with the GUI should prompt the user to reboot (like the CLI)
A reboot is required in order to activate a newly loaded configuration. The GUI does not make the
user aware of this after loading a configuration. HP is working to resolve this issue.
Changing the NTP configuration in the GUI is not persistent
Changes made with the GUI to the NTP configuration are not persistent across reboots. The CLI should
be used to make NTP configuration changes.
14