HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)
See also
“Create user command” on page 23
“Delete user command” on page 26
“Enable user command” on page 35
“Modify user command” on page 46
“Show user command” on page 68
“Show users command” on page 69
Enable bootset command
Set the active bootset.
Syntax
enable bootset [number]
Keyword values
[number]
The number 1 or 2.
Notes
Since there are only two bootsets, enabling one bootset effectively disables the other. Therefore, there
is no “disable bootset” command.
See also
“Show bootset command” on page 52
“Show bootsets command” on page 52
Enable eth command
The DPM includes four Ethernet interfaces: MGMT, GE1, GE2, and GE3. This command enables the
specific Ethernet interface so that it can send or receive network traffic.
Syntax
enable eth [interface name]
Keyword values
[interface name]
Name of the Ethernet interface that you are enabling: MGMT, GE1, GE2, or GE3.
See also
“Disable eth command” on page 26
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 31