HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)
[interface name]
Ethernet interface that you are changing: MGMT, GE1, GE2, or GE3.
link [auto]
Auto negotiate duplex and link speed
link [duplex <duplex value>]
Full or half
link [speed <link speed>]
10, 100, or 1000.
family
IPv4, IPv6
method
Address resolution method—auto or manual
See also
“Disable eth command” on page 26
“Enable eth command” on page 31
“Modify eth command” on page 40
“Show eth command” on page 58
“Show eths command” on page 58
Show bootset command
Displays the platform, version, status, checksum, and active status of the bootset specified.
Syntax
show bootset [number]
Keyword values
[number]
Number of the bootset (1 or 2).
See also
“Enable bootset command” on page 31
“Show bootsets command” on page 52
Show bootsets command
Displays the platform, version, status, checksum, and active status of all the bootsets.
CLI commands52