HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)
See also
“Disable ssh command” on page 29
“Enable ssh command” on page 34
“Restart ssh command” on page 49
Show status command
Returns the current status of all power supplies, fans, thermometers, and voltages for the DPM, and
reports errors where detected.
Syntax
show status
Show syslog command
Returns the port number, socket protocol, name, and IP address of each remote logging server. Lines
marked with an asterisk are disabled.
Syntax
show syslog
See also
“Add syslog command” on page 21
“Add syslog command” on page 25
“Disable syslog command” on page 30
“Enable syslog command” on page 35
Show telnet command
Enables use of the telnet application to connect to the DPM CLI.
Syntax
show telnet
See also
“Disable telnet command” on page 30
“Enable telnet command” on page 35
Show therm command
Returns the status, current temperature in Celsius and Fahrenheit, and the minimum and maximum
thresholds for the specified thermometer. The DPM has six thermometers.
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 67