Managing HP Serviceguard for Linux, Eighth Edition, March 2008

IPv6 Network Support
Configuring IPv6 on Linux
Appendix E384
Configuring a Channel Bonding Interface with
Persistent IPv6 Addresses on SUSE
Configure the following parameters in
/etc/sysconfig/network/ifcfg-bond0:
BOOTPROTO=static
BROADCAST=10.0.2.255
IPADDR=10.0.2.10
NETMASK=255.255.0.0
NETWORK=0.0.2.0
REMOTE_IPADDR=""
STARTMODE=onboot
IPADDR1=3ffe::f101:10/64
IPADDR2=fec0:0:0:1::10/64
BONDING_MASTER=yes
BONDING_MODULE_OPTS="mode=active-backup miimon=100"
BONDING_SLAVE0=eth1
BONDING_SLAVE1=eth2
For each additional IPv6 address, specify an additional parameter with
IPADDR<num> in the configuration file.
Bonding module options are specified in each of the bond device files, so
nothing needs to specified in /etc/modprobe.conf