Serviceguard Disaster Recovery Products Compatibility and Feature Matrix (Metrocluster with Continuous Access for P9000 and XP) - HPUX and Linux

3
Metrocluster with
Continuous Access for
P9000 and XP Version
HP-UX
Version
SG Version
MCDREnabler
fileset
Version
1
XP/P9000 Platform & Microcode2
Raid Manager
Version
Feature(s)
60-08-xx-xx or later
replication with 3 links and delta re-synchronization
14. Support for Data Replication Storage Failover Preview in a 3DC
DR Solution
15. Support for Device group monitoring in a 3DC DR solution
16. SADTA support of CVM/CFS 5.1 SP1 (Serviceguard Storage
Management Suite A.04.00)
17. Support for HP Integrity Virtual Machines v4.3 with VM as a
package.
18. Support multiple CFS Mount Points and CVM Disk Groups
configured in a single modular package
19. Support for HP Virtual Partitions v6.0 – vPar as a Serviceguard
Node
20. Support for HP vPar and Integrity VM v6.1, v6.1.5, v6.2, v6.3
– vPar / VM as a Serviceguard Package and vPar
6
/ VM as a
Serviceguard Node
21. Support for HP Integrity Virtual Machines v4.3 (with January
2012 patch) with VM as a Serviceguard Node.
A.10.00
(September ’09)
Documentation for this
product version:
11i v2
A.11.18
and
A.11.19
A.09.00
XP512/48: 01-19-99 or later
XP1024/128: 21-14-33 or later
XP10000: 50-09-34 or later
XP12000: 50-09-34 or later
XP20000: 60-02-04-00 or later
XP24000: 60-02-04-00 or later
3DC configuration: XP10000/XP12000: 50-09-
34 or later.
XP20000/XP24000: 60-02-04-00 or later
01.21.06 or later
Enhancements with this revision:
1. Modular package support
(legacy packages also supported)
7
2. Support for HP Integrity Virtual Machines 4.1 and 4.2
- Backing store types:
o Whole disk
8
o Files inside logical volumes (LVM, VxVM)
o Raw logical volumes (LVM, VxVM)
3. Support for Oracle ASM (with Single Instance Database)
4. Rolling Upgrade for Site Aware Disaster Tolerant Architecture
(SADTA) Configurations
5. Support for Veritas CVM Standalone Software in SADTA
11i v3
A.11.18
and
A.11.19
6
VM/vPar as a Serviceguard Package: It is not recommended to replicate Guest’s/vPar’s boot disk across sites as the boot disk on recovery site will have different WWID. So, it is recommended to have a separate boot disk image at each site
with same Guest name. Any changes to this root disk must be manually synchronized between sites.
7
Note: For migration of legacy packages to Modular packages, the following Serviceguard patches are required.
PHSS_39613 for HP-UX 11i v2, PHSS_39614 for HP-UX 11i v3 which will be available by October 2009.
8
Note: Whole disk is supported only when the HPVM guest is configured with a modular style Metrocluster package.