HP 8 Internal Port SAS Controller and HP Multi-Port Internal SAS Controller Support Guide, September 2009

Viewing the Properties of an Array
To view the properties of an existing array volume, follow these steps:
1. Start drvcfg, using the Driver ID and Ctrl ID of the SAS Host Bus Adapter (See “Determining
the Driver ID and Ctrl ID” (page 32)). In this example, the Driver ID is 2C, and the Ctrl ID
is 2F:
Shell> drvcfg -s 2c 2F
The Adapter List screen appears:
2. Select the SAS Host Bus Adapter (SAS1068) and press Enter. The Adapter Properties
screen appears:
3. Select RAID Properties and press Enter. The Select New Array Type screen appears:
Example: Adding, Viewing, and Deleting An Integrated Mirror Volume Using drvcfg 37