HP 8 Internal Port SAS Controller and HP Multi-Port Internal SAS Controller Support Guide, September 2009

1. Start drvcfg, using the Driver ID and Ctrl ID of the SAS Host Bus Adapter (See “Determining
the Driver ID and Ctrl ID” (page 32)). In this example, the Driver ID is 2C, and the Ctrl ID
is 2F:
Shell>drvcfg -s 2C 2F
The Adapter List screen appears:
2. Select the SAS Host Bus Adapter (SAS1068) and press Enter. The Adapter Properties
screen appears:
3. Select RAID Properties and press Enter. The Select New Array Type screen appears:
Example: Adding, Viewing, and Deleting An Integrated Mirror Volume Using drvcfg 39